Brackets
Brackets and cantilever arms for assembling modular support systems
18 Products
Filter

- Description
- Cantilever arm with MT-30 strut channel
- Material composition
- Q235 or better steel
- Surface finish
- Electrogalvanized - for dry indoor use only
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)






- Description
- Cantilever arm with MT-40 strut channel
- Material composition
- Q235 or better steel
- Surface finish
- Electrogalvanized - for dry indoor use only
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)






- Description
- Cantilever arm with MT-40 strut channel, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)






- Description
- Cantilever arm with MT-30 strut channel, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)






- Description
- Cantilever arm with back-to-back MT-40 strut channels, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)






- Description
- Cantilever arm with MT-40 strut channel and four-hole baseplate, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)






- Description
- Cantilever arm with back-to-back MT-40 strut channels and four-hole baseplate, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)






- Description
- Cantilever arm with back-to-back MT-40 strut channels
- Material composition
- Q235 or better steel
- Surface finish
- Electrogalvanized - for dry indoor use only
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)






- Description
- Hot-dip galvanised (HDG) double bracket for medium-duty applications
- Material thickness
- Channel: 2 mm, Baseplate: 8 mm
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Outdoor Coated - HDG

- Description
- Stainless steel double bracket for medium-duty applications
- Material thickness
- Channel: 2 mm, Baseplate: 8 mm
- Material composition
- Stainless steel, 1.4404 (A4) – EN 10088, AISI 316L
- Surface finish
- Outdoor Plus - Stainless Steel


- Description
- Stainless steel double bracket for medium-duty applications
- Material thickness
- Channel: 2 mm, Baseplate: 10 mm
- Material composition
- Stainless steel, 1.4404 (A4) – EN 10088, AISI 316L
- Surface finish
- Outdoor Plus - Stainless Steel


- Description
- Hot-dip galvanised (HDG) bracket with a 41 mm high, single MQ strut channel for medium-duty applications
- Material thickness
- Channel: 2 mm, Baseplate: 8 mm
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Outdoor Coated - HDG

- Description
- Stainless steel bracket with a 41 mm high, single MQ strut channel for high corrosion protection
- Material thickness
- Channel: 2 mm, Baseplate: 8 mm
- Material composition
- Stainless steel, 1.4404 (A4) – EN 10088, AISI 316L
- Surface finish
- Outdoor Plus - Stainless Steel


- Description
- Hot-dip galvanised (HDG) bracket with a 72 mm high, single MQ strut channel for medium-duty applications
- Material thickness
- Channel: 2.75 mm, Baseplate: 10 mm
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Outdoor Coated - HDG

- Description
- Hot-dip galvanised (HDG) bracket for light- and medium-duty pipe support systems
- Material thickness
- Channel: 3 mm, Baseplate: 5 mm
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Outdoor Coated - HDG

- Description
- Hot-dip galvanised (HDG) bracket
- Material thickness
- Channel: 3 mm, Baseplate: 5 mm
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Outdoor Coated - HDG

- Description
- Bracket
- Material thickness
- Channel: 1 mm, Baseplate: 4 mm
- Material composition
- Material channel: S235 JR - DIN EN 10025-2, Material plate: S355 MC - DIN EN 10149-2
- Surface finish
- Galvanized

- Description
- Bracket
- Material thickness
- Channel: 1.75 mm, Baseplate: 6 mm
- Material composition
- Material channel: S235 JR - DIN EN 10025-2, Material plate: S355 MC - DIN EN 10149-2
- Surface finish
- Galvanized