Galvanised Hardware

Accessories for modular support systems – threaded rods, hexagonal nuts, screws, bolts, adapters and washers in a galvanised surface finish

AM Galvanised threaded rod with 4.8 steel grade

AM pre-cut all thread studs - Steel grade 4.6 Galvanised pre-cut lengths of threaded rod with 4.6 steel grade

AM 8.8 Threaded rod Economical threaded rod for injectable hybrid/epoxy anchors (8.8 carbon steel according to DIN 976-1)

Galvanised grade 8 hexagon nut DIN 934 Galvanised grade 8 hexagon nut corresponding to DIN 934

HAS 8.8 Metre anchor rod Anchor rod for injectable hybrid/epoxy anchoring in concrete and masonry

Galvanised flat washer ISO 7089 Galvanised flat washer corresponding to ISO 7089

Galvanised flat washer similar to ISO 7089 Galvanised flat washer similar to ISO 7089

Galvanised hexagon screw DIN 933 Galvanised hexagon screw corresponding to DIN 933

Hex head wood screw DIN 571 Galvanised hex head wood screw corresponding to DIN 571

GR-G Threaded pipes Galvanised threaded pipe with 4.6 steel grade used as an accessory for various applications

Galvanised hanger bolt 4.6 Torx head Galvanised hanger bolt with steel grade 4.6 and Torx head

DH-SR Galvanised threaded bolt with threads on both ends for various applications

MF-SKD pivot anchors Galvanised pivot anchors for use in trapezoidal metal sheets

MQZ-A Galvanised pipe ring saddle adapter for converting the diameter of threaded rods

MW-MX angles Galvanised angles to increase stiffness while supporting pipe rings in riser shafts

RA pipe hangers Galvanised pipe hangers for suspension applications of pipes

Hex coupling nut Galvanised hexagonal coupling nut for extending threaded rods